document number: 82582 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.6, 20-dec-07 1 optocoupler, phototransistor output, (dual, quad channel), 110 c rated ild1615/ilq1615 vishay semiconductors description the ild/q1615 are multi-channel 110 c rated phototransistor optocouplers that use gaas irled emiters and high gain npn phototransistors. these devices are constructed using over/under leadframe optical coupling and double molded insulation technology resulting a withstand test voltage of 7500 vac peak and a working voltage of 1700 v rms . the binned min./max. and linear ctr characteristics make these devices well suited for dc or ac voltage detection. eliminating the phototransis tor base connection provides added electrical noise immunity from the transients found in many industrial control environments. because of guaranteed maximum non-saturated and saturated switching characteristics, the ild/q1615 can be used in medium sp eed data i/o and co ntrol systems. the binned min./max. ctr specific ation allow easy worst case interface calculations for both level detection and switching applications. interfacing with a cmos logic is enhanced by the guaranteed ctr at i f = 1.0 ma. features ? operating temperature from - 55 c to + 110 c ? identical channel to channel footprint ? dual and quad packages feature: - reduced board space - lower pin and parts count - better channel to channel ctr match - improved common mode rejection ? isolation test voltage, 5300 v rms ? lead (pb)-free component ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec agency approvals ? ul1577, file no. e52744 system code h or j, double protection ? csa 93751 ? bsi iec 60950; iec 60065 ? din en 60747-5-2 (vde 0884)/din en 60747-5-5 pending available with option 1 i179052 1 2 3 4 8 7 6 5 e c c e a c c a a c c a a c c a e c c e e c c e 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 dual channel quad channel
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 82582 2 rev. 1.6, 20-dec-07 ild1615/ilq1615 vishay semiconductors optocoupler, photot ransistor output, (dual, quad channel), 110 c rated note for additional information on the availabl e options refer to option information. note (1) t amb = 25 c, unless otherwise specified. stresses in excess of the absolute maximum ratings can cause per manent damage to the device. functional operation of the device is not implied at these or any other c onditions in excess of t hose given in the operational sections of this document. exposure to abs olute maximum ratings for extended periods of the time can adversely affect reliability. (2) refer to wave profile for solderin g conditions for through hole devices. order information part remarks ild1615-1 ctr 40 to 80 %, dip-8 ilq1615-1 ctr 40 to 80 %, dip-16 ild1615-2 ctr 63 to 125 %, dip-8 ilq1615-2 ctr 63 to 125 %, dip-16 ild1615-3 ctr 100 to 200 %, dip-8 ilq1615-3 ctr 100 to 200 %, dip-16 ild1615-4 ctr 160 to 320 %, dip-8 ilq1615-4 ctr 160 to 320 %, dip-16 absolute maximum ratings (1) parameter test condition symbol value unit input peak reverse voltage v r 6.0 v forward current i f 60 ma surge current i fsm 1.5 a power dissipation p diss 100 mw derate linearly from 25 c 1.0 mw/c output collector emitter breakdown voltage bv ceo 70 v emitter collector breakdown voltage bv eco 7.0 v collector current i c 50 ma t < 1.0 ms i c 100 ma power dissipation p diss 150 mw derate linearly from 25 c 1.5 mw/c coupler storage temperature t stg - 55 to + 150 c operating temperature t amb - 55 to + 110 c soldering temperature (2) 2.0 mm distance from case bottom t sld 260 c package power dissipation ild1615 400 mw derate linearly from 25 c 5.33 mw/c package power dissipation ilq1615 500 mw derate linearly from 25 c 6.67 mw/c isolation test voltage t = 1.0 s v iso 5300 v rms creepage distance 7.0 mm clearance distance 7.0 mm isolation resistance v io = 500 v, t amb = 25 c r io 10 12 v io = 500 v, t amb = 100 c r io 10 11
document number: 82582 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.6, 20-dec-07 3 ild1615/ilq1615 optocoupler, phototransistor output, (dual, quad channel), 110 c rated vishay semiconductors note t amb = 25 c, unless otherwise specified. minimum and maximum values are tested requier ements. typical values are characteristics of the device and are the result of eng ineering evaluations. typical values are for information onl y and are not part of the testing requirements. electrical characteristcs parameter test condition symbol min. typ. max. unit input forward voltage i f = 1.0 ma v f 1.0 1.15 1.3 v breakdown voltage i r = 10 a v br 6.0 30 v reverse current v r = 6.0 v i r 0.01 10 a capacitance v r = 0 v, f = 1.0 mhz c o 25 pf output collector emitter capacitance v ce = 5.0 v, f = 1.0 mhz c ce 6.8 pf collector emitter leakage current, -1, -2 v ce = 10 v i ceo 2.0 50 na collector emitter leakage current, -3, -4 v ce = 10 v i ceo 5.0 100 na collector emitter breakdown voltage i ce = 0.5 ma bv ceo 70 v emitter collector breakdown voltage i e = 0.1 ma bv eco 7.0 v package transfer characteristics channel/channel ctr match i f = 10 ma, v ce = 5.0 v ctrx/ctry 1 to 1 2 to 1 coupler capacitance (input to output) v io = 0 v, f = 1.0 mhz c io 0.8 pf insulation resistance v io = 500 v, t a = 25 c r s 10 12 10 14 channel to channel isolation 500 vac current transfer ratio parameter test condition part symbol min. typ. max. unit current transfer ratio (collector emitter saturated) i f = 1.0 ma, v ce = 0.4 v ild1615-1 ctr cesat 25 % ilq1615-1 ild1615-2 ctr cesat 40 % ilq1615-2 ild1615-3 ctr cesat 60 % ilq1615-3 ild1615-4 ctr cesat 100 % ilq1615-4 current transfer ratio (collector emitter) i f = 10 ma, v ce = 5.0 v ild1615-1 ctr ce 40 60 80 % ilq1615-1 i f = 1.0 ma, v ce = 5.0 v ild1615-1 ctr ce 13 30 % ilq1615-1 i f = 10 ma, v ce = 5.0 v ild1615-2 ctr ce 63 80 125 % ilq1615-2 i f = 1.0 ma, v ce = 5.0 v ild1615-2 ctr ce 22 45 % ilq1615-2 i f = 10 ma, v ce = 5.0 v ild1615-3 ctr ce 100 150 200 % ilq1615-3 i f = 1.0 ma, v ce = 5.0 v ild1615-3 ctr ce 34 70 % ilq1615-3 i f = 10 ma, v ce = 5.0 v ild1615-4 ctr ce 160 200 320 % ilq1615-4 i f = 1.0 ma, v ce = 5.0 v ild1615-4 ctr ce 56 90 % ilq1615-4
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 82582 4 rev. 1.6, 20-dec-07 ild1615/ilq1615 vishay semiconductors optocoupler, photot ransistor output, (dual, quad channel), 110 c rated switching characteristics parameter test condition part symbol min. typ. max. unit non-saturated turn-on time i f = 10 ma, v cc = 5.0 v, r l = 75 , 50 % of v pp t on 3.0 s rise time i f = 10 ma, v cc = 5.0 v, r l = 75 , 50 % of v pp t r 2.0 s turn-off time i f = 10 ma, v cc = 5.0 v, r l = 75 , 50 % of v pp t off 2.3 s fall time i f = 10 ma, v cc = 5.0 v, r l = 75 , 50 % of v pp t f 2.0 s propagation h to l i f = 10 ma, v cc = 5.0 v, r l = 75 , 50 % of v pp t phl 1.1 s propagation l to h i f = 10 ma, v cc = 5.0 v, r l = 75 , 50 % of v pp t plh 2.5 s saturated turn-on time i f = 20 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-1 t on 3.0 s ilq1615-1 i f = 10 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-2 t on 4.3 s ilq1615-2 ild1615-3 t on 4.3 s ilq1615-3 i f = 5.0 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-4 t on 6.0 s ilq1615-4 rise time i f = 20 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-1 t r 2.0 s ilq1615-1 i f = 10 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-2 t r 2.8 s ilq1615-2 ild1615-3 t r 2.8 s ilq1615-3 i f = 5.0 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-4 t r 4.6 s ilq1615-4 turn-off time i f = 20 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-1 t off 18 s ilq1615-1 i f = 10 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-2 t off 25 s ilq1615-2 ild1615-3 t off 25 s ilq1615-3 i f = 5.0 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-4 t off 25 s ilq1615-4 fall time i f = 20 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-1 t f 11 s ilq1615-1 i f = 10 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-2 t f 14 s ilq1615-2 ild1615-3 t f 14 s ilq1615-3 i f = 5.0 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-4 t f 15 s ilq1615-4
document number: 82582 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.6, 20-dec-07 5 ild1615/ilq1615 optocoupler, phototransistor output, (dual, quad channel), 110 c rated vishay semiconductors typical characteristics t amb = 25 c, unless otherwise specified fig. 1 - permissible power dissipation vs . temperature non-saturation operation fig. 2 - forward voltage vs. forward current saturated propagation h to l i f = 5.0 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-1 t phl 1.6 s ilq1615-1 ild1615-2 t phl 2.6 s ilq1615-2 ild1615-3 t phl 2.6 s ilq1615-3 ild1615-4 t phl 5.4 s ilq1615-4 propagation l to h i f = 5.0 ma, v cc = 5.0 v, r l = 1.0 k , v ht = 1.5 v ild1615-1 t plh 8.6 s ilq1615-1 ild1615-2 t plh 7.2 s ilq1615-2 ild1615-3 t plh 7.2 s ilq1615-3 ild1615-4 t plh 7.4 s ilq1615-4 switching characteristics parameter test condition part symbol min. typ. max. unit common mode transient immunity parameter test condition symbol min. typ. max. unit common mode rejection output high v cm = 50 v p-p , r l = 1.0 k , i f = 0 ma cm h 5000 v/s common mode rejection output low v cm = 50 v p-p , r l = 1.0 k , i f = 0 ma cm l 5000 v/s common mode coupling capacitance c cm 0.01 pf 0 50 100 150 200 250 300 350 400 0204060 8 0 100 120 1 8 731 p - po w er dissipation (m w ) tot detector led t am b - am b ient temperat u re (c) 0.7 0. 8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 0.10 1.00 10.00 100.00 i f - for w ard c u rrent (ma) 17596 v - for w ard v oltage ( v ) f 110 c 0 c 50 c 25 c - 55 c
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 82582 6 rev. 1.6, 20-dec-07 ild1615/ilq1615 vishay semiconductors optocoupler, photot ransistor output, (dual, quad channel), 110 c rated fig. 3 - collector current vs. collector emitter voltage fig. 4 - collector to emitter dark current vs. ambient temperature fig. 5 - normalized current vs. collector emitter saturation voltage fig. 6 - normalized current transfer ratio vs. ambient temperature fig. 7 - normalized ctr vs. temperature fig. 8 - normalized ctr vs. forward current 0 5 10 15 20 25 30 35 40 45 50 01 4 8 10 11 12 13 14 15 v - collector emitter v oltage ( v ) 1 8 733 i - collector c u rrent (ma) c ce i = 30 ma i = 1 ma i = 5 ma i = 10 ma i = 15 ma i = 20 ma f f f f f f 23 67 5 9 0.10 1 10 100 1000 10000 - 75 - 25 25 75 125 t - am b ient temperat u re (c) 1 8 734 ce0 i (na) am b 40 v 12 v 24 v 0 10 20 30 0.0 0.1 0.2 0.3 0.4 0.5 0.6 v - collector to emitter v oltage ( v ) 1 8 735 i (ma) 5 ma 1 ma c ce 25 ma 2 ma 10 ma 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 - 55 - 35 - 15 5 25 45 65 8 5 105 125 t am b - am b ient temperat u re (c) 17597 ctr - n ormalized o u tp u t c u rrent n ormalized to: i f = 10 ma, t am b = 25 c, v ce = 0.4 v , sat u rated n orm i f = 5 ma 10 ma 1 ma 0.00 0.20 0.40 0.60 0. 8 0 1.00 1.20 - 55 - 35 - 15 5 25 45 65 8 5 105 125 t - am b ient temperat u re (c) 1 8 737 ctr - n ormalized o u tp u t c u rrent 10 ma 5 ma 1 ma n ormalized to: temp = 25 c at i = 10 ma and v =5 v n orm am b f ce 1.10 0.90 0.70 0.50 0.30 0.10 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 0.10 1.00 10.00 100.00 i f - for w ard c u rrent (ma) 1759 8 - 4 - 1 - 3 - 2 ctr - n ormalized o u tp u t c u rrent n orm n ormalized to: i f = 10 ma, t am b = 25 c, v ce = 0.4, sat u rated
document number: 82582 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.6, 20-dec-07 7 ild1615/ilq1615 optocoupler, phototransistor output, (dual, quad channel), 110 c rated vishay semiconductors fig. 9 - normalized ctr vs. forward current fig. 10 - forward resistance vs. forward current fig. 11 - forward resistance vs. forward current 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 0.10 1.00 10.00 100.00 i f - for w ard c u rrent (ma) 17599 ctr - n ormalized o u tp u t c u rrent n orm n ormalized to: i f = 10 ma, t am b = 25 c, v ce = 5 v , non-sat u rated - 4 - 1 - 3 - 2 1 10 100 1000 0.1 1.0 10.0 100.0 r - load resistance (k ) 1 8 340 s w itching time ( s) t off t on p u lse w idth = 100 ms i = 10 ma d u ty cycle = 50 % l f 1 10 100 1000 0.1 1 10 100 r - load resistance (k ) 1 8 341 s w itching time (ms) t t p u lse w ith = 100 ms i = 10 ma d u ty cycle = 50 % l f rise fall
www.vishay.com for technical questions, contact: optocoupler.answers@vishay.com document number: 82582 8 rev. 1.6, 20-dec-07 ild1615/ilq1615 vishay semiconductors optocoupler, photot ransistor output, (dual, quad channel), 110 c rated package dimensions in inches (millimeters) i17 8 006 pin one id 0.255 (6.4 8 ) 0.26 8 (6. 8 1) 0.379 (9.63) 0.390 (9.91) 0.030 (0.76) 0.045 (1.14) 4 typ. 0.100 (2.54) typ. 10 3 to 9 0.300 (7.62) typ. 0.01 8 (0.46) 0.022 (0.56) 0.00 8 (0.20) 0.012 (0.30) 0.110 (2.79) 0.130 (3.30) 0.130 (3.30) 0.150 (3. 8 1) 0.020 (0.51) 0.035 (0. 8 9) 0.230 (5. 8 4) 0.250 (6.35) 4 3 2 1 0.031 (0.79) 0.050 (1.27) 5 6 7 8 iso method a 0.255 (6.4 8 ) 0.265 (6. 8 1) 0.779 (19.77) 0.790 (20.07) 0.030 (0.76) 0.045 (1.14) 4 0.100 (2.54) typ. 10 typ. 3 to 9 0.01 8 (0.46) 0.022 (0.56) 0.00 8 (0.20) 0.012 (0.30) 0.110 (2.79) 0.130 (3.30) pin one id 0.130 (3.30) 0.150 (3. 8 1) 0.020 (0.51) 0.035 (0. 8 9) 8 7 6 5 4 3 2 1 9 10 11 12 13 14 15 16 0.031 (0.79) 0.300 (7.62) typ. 0.230 (5. 8 4) 0.250 (6.35) 0.050 (1.27) i17 8 007 iso method a
document number: 82582 for technical questi ons, contact: optocoupler.answers@vishay.com www.vishay.com rev. 1.6, 20-dec-07 9 ild1615/ilq1615 optocoupler, phototransistor output, (dual, quad channel), 110 c rated vishay semiconductors ozone depleting substa nces policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve t he performance of our products, processes, distribution and o perating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate releases of those substances in to the atmosphere whic h are known as ozone depleting substances (odss). the montreal protocol (1987) a nd its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. vari ous national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its policy of co ntinuous improvements to elim inate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively. 2. class i and ii ozone depleting substances in the clean air ac t amendments of 1990 by the environmental protection agency (epa) in the usa. 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify t hat our semiconductors are not manufactured with ozone dep leting substances and do not contain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating para meters must be validated for each customer application by the customer. should the buyer use vishay semiconductors products for any unintended or unauthorized application, the buyer shall indemnify vishay semiconductors against all claims, costs, dam ages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death as sociated with such unint ended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
